How to Use the Virtual Safety Frame Try-On & Segment Height Reader
Part 1: Virtual Safety Frame Try-On & Size Comparator
(Use this tab to preview how safety frames look on your face and compare their dimensions to your current glasses.)
Choose Your Preview Method:
Live Webcam: Click Live Try-On Camera and allow browser camera access to preview safety frames live on your face.
Upload Photo: Click Upload Face Photo to test frames on a clear, front-facing photo from your device (click Reset Model at any time to return to the sample preview).
Filter & Select a Safety Frame:
Use the Brand Filter dropdown to browse a specific manufacturer (7Eye, ArmouRx, Art-Craft USA Workforce, Hudson Optical, Oakley, OnGuard, Pentax, Stoggles, VS Eyewear, or Wiley X) or view all 328 frames.
Use the Search box to filter by model name or size (for example, RX-Q300, Wiley, or 55-18), then pick your frame from the Safety Frame Catalog dropdown.
Review the frame's Eye-Bridge-Temple dimensions, B-Height (vertical lens height), Overall Width, and ANSI Z87.1+ rating displayed directly below the dropdown.
Adjust the On-Screen Fit:
Drag the Frame Width Scale slider to match the frame width to your face.
Drag the Bridge Vertical Position slider so the frame bridge rests naturally across the bridge of your nose.
Compare With Your Current Eyewear:
Check the three numbers printed on the inside temple arm of your current glasses (for example, 54 - 18 - 140 representing Lens Width, Bridge, and Temple in millimeters).
Enter those numbers into the Compare With Your Current Frame boxes to instantly see whether your selected safety frame will fit wider, snugger, or the same.
Part 2: Multifocal Segment Height Reader (Progressive & Lined Bifocal Lenses Only)
(Skip this tab if you wear single-vision lenses. If you wear progressive or lined bifocal lenses, wear your current glasses during this measurement.)
Switch to the Segment Height Tab: Click 2 Multifocal Segment Height Reader at the top of the tool.
Capture or Upload Your Photo:
Put on your current glasses and hold any standard-sized credit card, driver’s license, or employee ID badge (85.6 mm wide) flat against your forehead or chin while facing straight ahead at the camera.
Click Live Camera (then Capture Photo) or click Upload Photo w/ Glasses to load your image.
Select Your Multifocal Lens Style & Align Markers:
Progressive (No-Line): Click Progressive (No-Line), drag the amber dots to the exact left and right edges of your card/ID badge (85.6 mm), drag the blue dot to the center of your pupil, and drag the red horizontal bar to the bottom inside edge of the lens (where the lens meets the bottom frame rim).
Lined Bifocal: Click Lined Bifocal, align the amber dots to your card and the red bar to the bottom inside lens rim, then drag the green horizontal line to align with your lower eyelid margin.
Verify Frame Compatibility:
Review your Measured Segment Height on the right—confirm progressive measurements meet the 18 mm minimum corridor requirement and check the Selected Frame Compatibility box underneath to verify your chosen safety frame has enough vertical B-Height clearance.
Part 3: Copy & Submit Your Results
Check the dark summary bar at the bottom of the tool to verify your Selected Safety Frame and Multifocal Segment Height.
Click Copy Frame & Seg Height and paste the summary directly into your prescription safety glasses order or email to your safety coordinator.
Need Assistance?
Contact VS Eyewear Support at 877-872-5780 or mdemasi@vseyewear.com for help with frame sizing, multifocal compatibility, or corporate safety eyewear orders.